Cart
Your cart is empty
High Swiss Strandred
Free US Shipping Over $49
Free Returns
30 Days Returns
1 Years Guarantee
professional dual sided spring bar compression tool designed for spring bars with shoulders accessed from the middle
This is a mechanical watch bracelet and strap removal tool designed to work on spring bars with shoulders accessed from the center with precision safety and control.
The main adjustable aluminum holder is CNC machined from solid aluminum for maximum rigidity and long term durability. It allows you to securely grip the bracelet at the end links while precisely compressing both sides of the spring bar at the same time. The adjustable width lets you fine tune the fit so the tool sits perfectly between the lugs without slipping scratching or flexing.
How to use:
The large adjustable tool works by aligning the hardened tips into the spring bar shoulders or spring bar ends. Once positioned you gently tighten the tool so both ends compress evenly. The bracelet releases cleanly without twisting bending or marking the case. Reinstallation is just as controlled compress the spring bars in the tool place the bracelet between the lugs release tension and gently wiggle into position until it locks.
Included spring bars are displayed with each tool to clearly show compatibility.
The large adjustable tool supports all shoulder spring bar types covering straight spring bars fat spring bars shoulder spring bars non shoulder spring bars and heavy duty professional bars.
For best results and to avoid scratching your watch case and lugs, we strongly recommend using our lug protection stickers before removing or installing any bracelet. These protective stickers create a safe barrier between the tool and your watch, helping prevent accidental marks and preserving the original finish.
You can find the lug protection stickers here:
Watch Lugs Protection stickers
Hey there! It's pretty simple: we totally want you to fall in love with what you buy from us, just like we have. Not feeling it 100%? No stress! Just hit us up, and we promise we'll sort it out for you.
Always measure the watch lug width, not the spring bar itself. The correct size is the distance between the inner edges of the lugs where the strap sits. Measuring the spring bar can be misleading because spring bars compress and extend.
Use a digital caliper for the most accurate result. Measure the inside distance between the lugs in millimeters. If you do not have a caliper, a ruler can be used, but accuracy may vary. Always round to the nearest standard size such as 18 mm, 20 mm, or 22 mm.
Spring bars are spring loaded and can appear shorter or longer depending on compression. Measuring the spring bar itself often results in the wrong size. The lug width of the watch case is the only reliable reference.
Thickness depends on the watch and strap.
1.5 mm is ideal for dress watches, vintage watches, and straps with tighter tolerances.
1.8 mm offers increased strength and is recommended for sports watches, tool watches, and heavier straps.
Always ensure your lug holes and strap can accommodate the selected thickness.
Yes. These spring bars are designed with precise tolerances to fit both standard lug holes and solid lug hole cases. For solid lug watches, always verify that the lug hole diameter supports the selected thickness before installation.
MADE IN ITALY
Finest Premium Italian Leather
Swiss Structure and Hardware
Designed By Watchmaker
Craftsmanship and Testing
How to Measure a Watch Strap :
Remove the Strap (if needed):
- Take off the watch strap if it is still attached. This ensures precise measurement of the lug width.
2. Locate the Watch Lugs:
- The lugs are the small metal bars or openings on the watch case where the strap attaches.
3. Measure the Lug Width:
- Place the ruler across the inside of the lugs.
- Measure the distance between the two inner edges of the lugs (in millimeters).
4. Determine the Strap Width:
- The strap width should match the lug width to fit securely.
- For example, if the lug width is 20 mm, you need a strap that is also 20 mm wide.
💡 Pro Tip: Use a precision ruler or caliper for the most accurate measurements.
![[product_name]-Milano Straps](http://milanostraps.com/cdn/shop/files/Screenshot_2023-01-27_at_10.10.08_PM.jpg?v=1674875775&width=1466)
Our watch bands are designed with convenience in mind. They can be changed out quickly and easily, allowing you to switch up the look of your watch in no time. The process is simple and straightforward. All you need to do is rotate the band, and then clip it into place. This means you can change the band of your watch in the blink of an eye to suit your needs and preferences at any given time. Whether you want to match your watch band to your outfit, or you want to switch from a sporty band to a formal one, it's all possible with our quick-change design. This feature is great for those who like to change their look often and those who want to have multiple options of band styles.
We're proud of our brand, and we're always looking for ways to improve and evolve. We're always open to feedback and suggestions, so please don't hesitate to reach out and let us know what you think.
If you're looking for a new watch strap, or just a new leather accessory, we invite you to browse our collection and discover the Milano Straps difference for yourself.
